EDC γ sources in charcoal filter cartridges
Our active charcoal can be impregnated in two ways:
-
- Surface impregnation, a radioactive disk is placed in contact with one of the inside surfaces of the housing to simulate surface contamination (E geometry)
- Pore volume impregnation, the activated charcoal is homogeneously impregnated (D geometry)
Source activity is measured with calibrated Nal scintillators or HPGe semi-conductors.
Production Range
From 0.12 to 2 in
From 0.03 to 27 μCi
Mix 12ML01
Reference/Product No.
4 kBq • 0.11 μCi
≤ 5%
Ba133 EDC E 10
4 kBq • 0.11 μCi
≤ 8%
Cs137 EDC E 10
4 kBq • 0.11 μCi
≤ 5%
Eu152 EDC E 10
18.5 kBq • 0.5 μCi
[6% ; 8%]
12ML01 EDC E 11
Standard manufacturing tolerance: ± 30% | IAEA Category: 5 | ISO2919 Classification: C11111
* The 12ML01 mixture – Am-241, Cd-109, Ce-139, Co-57, Co-60, Cr-51, Cs-137, Sn-113, Mn-54, Zn-65, Sr-85, Y-88 – generates around 15 peaks over an energy range from 60 keV to 1836 keV. The quantity of each radionuclide is chosen so that the counting rates of the main peak of each radionuclide are the same order of magnitude. See below for additional information on the 12ML01 mixture and on the other mixes available. Other geometries are available on request.
12ML01 Mixture
Composition of the mixture
12ML01 60 keV – 1 836 keV
137 keV
1,333 keV
1,836 keV
Emission Spectrum
Any other mix of Am-241, Ba-133, Co-60, Cs-137 and Eu-152 can be produced on request for specific activities.
Contact Radnostix
Use the link below to contact us or call 1.208.524.5300